White/Black/White FR
Latex, UV & Dye Sub Transfer

A triple layered construction made of 100% polyester and 97% opaque. A black layer sandwiched between two bright white layers blocks light from passing through the fabric. This fabric is treated to meet the NFPA 701 small scale flammability standard.
Physical Properties

Printable Sides:
8.8oz / sq.yd.
100% Polyester
Triple Weave
21 mil
Either side is compatible for printing


  • Triple layered construction
  • Contains a black, light blocking layer
  • Treated to meet NFPA 701 flammability standard


P.O.P. Displays
Banner Stands
Sports Arenas
Frontlit Displays
Trade Show Displays
Indoor Banners
Kiosk Displays
Theatrical Displays
Temporary Outdoor Banners
Concerts, Festivals
Table Drapes

Finishing Tips:
Synthetic (polyester) fabrics can be cut with a hot knife and welded or stitched to finish, but should be pre-tested for welding compatibility. Certain jobs may also require fabrics to be properly reinforced for grommeting, etc. Additionally, care should be taken when stitching silicone gaskets for frame systems as the stretch varies in knit fabrics.

HP Certified

This media may not be certified for all HP Latex ink
and printing systems. Please check the HP media locator
website at

White Black White FR

Item Number Width Weight lbs Roll Dia.
FAURO-D34610B 58″ x 50yd 45 5.5″
FAURO-D34610A 116″ x 50yd 85 5.5″
FAURO-D34610 118″ x 50yd 90 5.5″


Spec Sheet PDF
GHS Safety Data Sheet/MSDS PDF

Standard roll length is 50 yds. but roll lengths may vary due to variability in piece lengths of fabric. Product is ordered and sold by the yard. Printer profiles for this product are available on HP’s media locator webpage or access them on Aurora’s website at For optimal print performance use with HP series printers which have “color optimization” technology. Printer compatibility can and does vary. It is the responsibility of the purchaser to determine compatibility. Sample rolls are available for such a purpose.