burnt red banner

VC Poly Banner Plus
Solvent/Eco Solvent, Latex, & UV

A light weight 100% polyester fabric with our print receptive polymer coating gives a sheer elegant look to any display or backdrop. VC Poly Banner Plus is suitable for indoor or short term outdoor applications.
Physical Properties

Weight:
Material:
Weave:
Thickness:
Printable Sides:
4.6oz / sq.yd.
100% Woven Polyester
Plain
7 mil
Coated side is compatible for printing

Benefits

  • Light Weight
  • Made with two layers of premium print receptive polymer coating
  • Provides extra pop and depth

Applications

Window Displays
Banner Stands
Sports Arenas
Trade Show Displays
Indoor Banners
P.O.P. Displays
Temporary Outdoor Banners
Concerts, Festivals
P.O.S. Retail Soft Signage

Finishing Tips:
Banner tape may be used to finish, but may alter the look or feel of the finished graphic. These fabric banner products may also be sewn and/or grommeted,but care should be taken to avoid scratching the imaged graphic. Though not prone to fraying, a fabric hot knife can also be used to trim the edges. Be sure to let graphics fully cure before finishing. Liquid laminates can be used, but should be pre-tested as certain types can yellow and/or crack over time.

VC Poly Banner Plus

Item Number Width Weight lbs Roll Dia.
FAURO-VCPBPL56 54″ x 50yd 28 5″
FAURO-VCPBPL60 60″ x 50yd 28 5″

Downloads

Spec Sheet PDF
GHS Safety Data Sheet/MSDS PDF

Epson GS 6000 Onyx Printer Profile
HP Latex 2xx Onyx Printer Profile

Standard roll length is 50 yds. but roll lengths may vary due to variability in piece lengths of fabric. Product is ordered and sold by the yard. Printer profiles for this product are available on HP’s media locator webpage or access them on Aurora’s website at www.auroratextiles.com. For optimal print performance use with HP series printers which have “color optimization” technology. Printer compatibility can and does vary. It is the responsibility of the purchaser to determine compatibility. Sample rolls are available for such a purpose.